4 learning more, 4 managing addresses and id pools, 1 roles – HP OneView User Manual
Page 179: 2 tasks for addresses and identifiers, 5 managing the security features of the appliance, 1 roles 25.4.2 tasks for addresses and identifiers, Ui screens and rest api resources
Install SNMP OS host agents for HP ProLiant G7 blade servers
For the appliance to monitor the health of HP ProLiant G7 blade servers, you need to configure
the SNMP settings for the server and iLO3.
1.
Install the host operating system on the server.
2.
Install the SNMP subsystem on the server.
3.
Configure SNMP on the host to use the community string and trap destination of the appliance.
4.
Using the latest SPP, install the HP management agent set and associated drivers. You will be
prompted for the SNMP community string and the trap destination.
5.
After the HP management agent set and associated drivers are installed and running, add the
HP ProLiant G7 blade server to the appliance.
If you install the agents and drivers after adding the G7 blade server, you might have to refresh
the G7 blade server from the user interface or with REST APIs.
NOTE:
If you change the appliance read community string, you must reconfigure all G7 blade
server SNMP OS host agents to use the new read community string. The appliance cannot propagate
this update to the host OS.
25.3.4 Learning more
•
“Planning the appliance configuration” (page 87)
•
“Managing appliance availability” (page 176)
•
“Managing the security features of the appliance” (page 179)
25.4 Managing addresses and ID pools
A default set of virtual ID pools for MAC addresses, WWNs, and serial numbers are provided at
startup. If you need additional addresses or identifiers, you can add autogenerated or custom
ranges of ID pools.
You manage the ID pools from the UI Settings screen or by using the REST APIs.
UI screens and REST API resources
REST API resource
UI screen
id-pools
Settings
25.4.1 Roles
•
Minimum required privileges: Infrastructure administrator
25.4.2 Tasks for addresses and identifiers
The appliance online help provides information about using the UI or the REST APIs to:
•
View a list of active ID pools and their properties.
•
Add an autogenerated ID pool for MAC addresses, WWNs, or serial numbers.
•
Add a custom ID pool range for MAC addresses, WWNs, or serial numbers.
25.5 Managing the security features of the appliance
To learn about the security features of the appliance, see
“Understanding the security features of
25.4 Managing addresses and ID pools
179