HP OneView - Manual (Page 160)

Description Best practice
Do not update the firmware on a managed device unless the firmware baseline is
set to manage manually. Verify the managed device setting
before updating the firmware.
HP recommends using HP SPPs. You can use HP SUM 6.0 or later to create custom
SPPs, which can be uploaded to the appliance repository. Because the appliance
only supports installing SPP ISO files, use HP SUM to insert firmware updates into
an existing SPP to create a custom SPP.
Download HP SUM 6.0 as a standalone
product.
If you choose to create custom
SPPs, use HP SUM to create them.
The appliance does not back up SPPs, so store custom SPPs in a repository that is
not on the appliance, such as in the HP SUM repository used to create the custom
SPP. Store custom SPPs in a separate
repository.
21.6 Learning more
•
“Troubleshooting firmware bundles” (page 229)
160 Managing firmware for managed devices