A.7.1 workflow, Assumptions – HP OneView User Manual
Page 284
1.
In the
of the Server Profiles screen, select win2k12 boot from 3PAR.
The appliance displays the details about the server profile in the details pane.
2.
In the Connections panel, scroll so that the two Fibre Channel connections are visible.
3.
Record the WWPN information for FlatSAN A and FlatSAN B.
A.7 Bringing an HP ProLiant DL360p Gen8 rack mount server under
management
This example demonstrates bringing the following HP ProLiant DL360p Gen8 rack mount server
under management.
Description
Attribute
HP ProLiant DL360p Gen8
Model
DL360pGen8-1796
Name
172.18.6.15
iLO IP address
User name
iLOAdmin
Password
S&leP@ssw0rd
iLO administrator credential:
Rack 173, U26
Physical location
Assumptions
•
The appliance is installed.
•
The iLO management processor for the server is configured with the IP address and
administrator credentials listed in the preceding table.
•
The server is connected to a live power source.
•
You do not have an embedded license for this server, but all of the other servers managed by
the appliance have licenses.
Because this is an HP ProLiant DL rack mount server:
•
You cannot use this appliance to provision any networks for the server.
•
You cannot assign a server profile to the server.
A.7.1 Workflow
1.
“Adding the server hardware” (page 285)
.
2.
“Powering on the server” (page 285)
.
3.
“Viewing information about the server” (page 285)
.
4.
“Adding a license for the server” (page 287)
.
284 Step by step: Configuring an example data center using HP OneView