HP OneView User Manual
Page 283
b.
Click Edit BIOS Settings.
The Edit BIOS Settings dialog box opens. The server hardware type that you selected for
this profile determines the default values for the BIOS settings.
c.
Scroll to Power Management Options and for HP Power Profile, select Maximum
Performance.
Changing this setting results automatic changes to several other BIOS settings.
d.
Click OK to save the edits and close the dialog box.
The Create Server Profile dialog box displays the BIOS settings whose values differ from
the default values.
10. Under Advanced, ensure that Virtual is selected for Serial Number/UUID, MAC addresses,
and WWN addresses.
Selecting Virtual for these settings provides flexibility because the appliance assigns these
numbers and addresses. For example, when you assign this server profile to a server bay in
an enclosure, any server hardware inserted in that server bay uses the same serial number,
MAC address, and WWN address. Therefore, you can replace the server hardware without
affecting other resources (such as interconnects).
11. Click Create to create the server profile and close the dialog box.
The
of the Server Profiles screen lists the profile you created. If you select a server
profile in the master pane, the appliance displays information about that server profile in the
details pane.
A.6.5 Collecting the WWPNs to use when configuring the HP 3PAR Storage System
When you configure the HP 3PAR Storage System, you use the WWPNs for each of the Direct
attach Fibre Channel connection. To collect the WWPNs:
A.6 Configuring a server blade to boot from the attached HP 3PAR Storage System 283