PATLITE NHL User Manual

Page 81

[Installation Method]

1. After deciding on the attachment direction of the partition mounting bracket, assemble this product to the

bracket. (Use the screws include when assembling).

Fig. 6.3.4 Partition mounting bracket installation method

2. Check the width of the partition, then select the proper clamping screw to thread through the bracket. Attach the

pressure plate and fittings.

Fig. 6.3.5 Installation Method 1

3. Turn the clamping screw clockwise to tighten.

Fig. 6.3.6 Installation Method 2

Option Name

Part Number

Partition Mounting Bracket

NH-PST

Please

Tighten the screws between this product and the partition mounting bracket with a

torque of about 0.39 N-m. Failure to do so may cause damage to the unit.

The partition mounting bracket may break if too much torque is applied.

Please

Long clamping screw application

Short clamping screw application

VOL.

RESET

TEST

HIGH
LOW
OFF

VOL.

RESET

TEST

HIGH
LOW
OFF

VOL.

RESET

TEST

HIGH
LOW
OFF

VOL.

RESET

TEST

HIGH
LOW
OFF

The short clamping screw is effective

for thicknesses of 48 to 58mm.

The long clamping screw is effective

for thicknesses of 18 to 48mm.

100

Bracket
Mounting
Location

NHL Underside View

NH-WST Outside Appearance

Installation Procedure

NHL Unit

NH-WST

Mounting Screws