PATLITE NHL - Manual (Page 72)

72
4
4.20 Firmware Update Screen
The firmware for this product can be updated.
After the firmware has been updated, this product automatically reboots.
[Setup Method]
1. Click the "reference" button to designate the firmware to rewrite for this product.
2. Clicking the "update" button will start the firmware update.
Fig. 4.20.1 Firmware Update Setup Screen
Fig. 4.20.2 Firmware Update Failure Screen
Please
Fig. 4.20.2 shows the type of screen in case an error occurs during the firmware update.
If an error occurs during the firmware update, please try again.
If an error repeatedly occurs during the firmware update process, please contact your
nearest Patlite Sales Representative.
Please
Do not disconnect the power cable or LAN cable during the update.
Possible cause of failure may occur.
Updating the firmware does not affect the current setup parameters, however, it
does affect the Event Log. Therefore, it is recommended to backup the “Event
Log” prior to updating the firmware.
①
②