PATLITE NHL User Manual
Page 44
44
4
4.2.2 Synchronizing with an NTP server
An NTP server can be linked by entering the NTP server address to synchronize with the clock in this product,
and the time updated by sending a request for time adjustment to that NTP server.
[Setup Method]
1. Enter the NTP server address in the "NTP Server Address" column.
2. Enter a value for the interval to communicate with the NTP server in the "Time Calibration Interval" column.
3. Click the "Set" button to activate the setup.
Fig. 4.2.4 NTP server Clock Setup Screen
• Depending on the NTP server, too many requests within an alloted time may cause
the server to disconnect for their security reasons.
• Some NTP servers may require the customer to submit an application to receive a
password for access, which is beyond the scope of this product. It is the customer’s
responsibility to coordinate with that service.
Please
①
②
③