PATLITE NHL - Manual (Page 58)

58
4
[Setup Method Continued]
8. Setup for Signal-Tower operation when a recovery from a monitor abnormality occurs.
9. To send an E-mail when a monitor abnormality recovery occurs, set the E-mail Sending to "Active".
When the E-mail Sending is activated
Register the subject and the message text to transmit. Then, select the recipient for the E-mail Sending.
10. When using the TRAP transmission, set to "Active".
11. Click the "Set" button to activate the setup.
TRAP Command received when TRAP condition occurs
OID: 1.3.6.1.4.1.20440.4.1.6.2
Name: trapPatliteAlarmRemoved
Fig. 4.10.2 Ping Monitor Setup Screen 2
Table 4.10.1 Ping Monitor Setup Parameters
Item Contents
Default
Value
Input Parameter
Setting
Option
Monitoring Target
Address
Setup the IP address or host name for ping monitoring. Blank
IP Address or Host Name
Maximum 63 Characters
O
Equipment
Name
Setup the name for the Ping transmission monitoring. Blank
Full/Half-size Characters
Maximum 32 Characters
O
TRAP Transmission
Frequency
Setup the number of Ping requests. 0 Half-size Integers 0 to 30 ―
Red
Select from: OFF- ON- Lighting- Flashing1- Flash-
ing2- No Flashing- No Change
No Change ― ―
Amber
Select from: OFF- ON- Lighting- Flashing1- Flash-
ing2- No Flashing- No Change
No Change ― ―
Green
Select from: OFF- ON- Lighting- Flashing1- Flash-
ing2- No Flashing- No Change
No Change ― ―
Blue
Select from: OFF- ON- Lighting- Flashing1- Flash-
ing2- No Flashing- No Change
No Change ― ―
White
Select from: OFF- ON- Lighting- Flashing1- Flash-
ing2- No Flashing- No Change
No Change ― ―
Buzzer
Select from:
Pattern1- Pattern2- Pattern3- Pattern4- Stop- No Change No Change
― ―
Email Transmission Select the Active/Inactive condition for the E-mail Sending. Inactive ― ―
Subject Select the E-mail subject title 1. Message ― ―
Message Select the E-mail message to text 1: ― ―
TRAP Transmission Select the Active/Inactive condition for the trap transmission. Inactive ― ―
⑧
⑨
⑩
⑪