PATLITE NHL - Manual (Page 31)

31
3
[Command Transmission Example - cont.]
Ex. 3) A product with an IP address of [192.168.10.10] and a designated sender user name of "root",
with the Red Lighting, Amber Flashing Pattern2, Green Lighting and Buzzer Pattern3, all on for 20
seconds:
rsh 192.168.10.10 -l root alert 131003 20
Ex. 4) A product with an IP address of [192.168.10.10] with Red Lighting, Amber Flashing Pattern2, Green
Lighting, Buzzer Pattern3, all on for 20 seconds (no login name)
rsh 192.168.10.10 alert 131003 20
clear/doclear Command
Contents : To clear the Signal Tower and Buzzer, returning to the Normal Mode.
Syntax : clear [-p] [-z] , doclear [-p] [-z]
Return Value : Status after command is executed
Option : Refer to Table 3.8.3.
Table 3.8.3 clear/doclear Command Option Explanation
Type Explanation
-p Turn off all Signal Tower Lights
-z Turn off Buzzer Alarm
None Return to Normal Mode
[Command Transmission Example]
Ex. 1) A product with an IP address of [192.168.10.10] and a common login name of "patlite",
with all the Signal Tower Lights turned off:
rsh 192.168.10.10 -l patlite clear -p
with all the Signal Tower Lights turned off (no login name):
rsh 192.168.10.10 clear -p
Ex. 2) A product with an IP address of [192.168.10.10] and a designated sender user name of "root",
with the Buzzer alarm turned off:
rsh 192.168.10.10 -l root doclear -z
with the Buzzer alarm turned off (no login name):
rsh 192.168.10.10 clear -z
Ex. 3) A product with an IP address of [192.168.10.10] and a designated sender user name of "root",
with all the Signal Tower Lights and Buzzer returned to the Normal Mode:
rsh 192.168.10.10 -l root clear
with all the Signal Tower Lights and Buzzer returned to the Normal Mode (no login name):
rsh 192.168.10.10 clear
status Command
Contents : Return the present status of the Signal Tower and buzzer to Normal Mode.
Syntax : status
Return Value : Current Condition rygbcz
[Command Transmission Example]
Ex. 1) A product with an IP address of [192.168.10.10] acquisitions the operating state of the Signal Tower.
The designated sender user name for the Signal Tower status acquisition is "patlite".
rsh 192.168.10.10 -l patlite status
Response: 201003
The login name was omitted for status acquisition of the Signal Tower.
rsh 192.168.10.10 status
Response: 201003