1 system setup screen – PATLITE NHL User Manual
Page 41
41
4
4.1 System Setup Screen
The network parameters for this product can be setup through a browser. The default IP address is
"
192.168.10.1
".
The parameters can be setup from the System Setup Screen (Fig. 4.1.1 System Setup Screen) from the default values
as shown in Table 4.1.1.
Fig. 4.1.1 System Setup Screen
Table 4.1.1 System Setup Parameters
Item
Contents
Default Value
Input Parameter
Setting
Option
System Name
The name for this product can be set.
Signal Tower Full/Half-width Characters
Maximum 31 Characters
O
System Location
The setup location of this product can be
entered.
Blank
Half-width alphanumeric
characters and underscore
“_”
Maximum 31 Characters
O
Contact Address
Setup the contact address.
[email protected] Mail address format
Maximum 63 Characters
O
IP Address
Configuration Method
Select between Manual or Automatic IP
address configuration.
Setup
Manually
Select Radio Button
X
IP Address
Setup the IP address of this product.
192.168.10.1 IP address format
X
Netmask
Setup the subnet mask of this product.
255.255.255.0 IP address format
X
Default Gateway
Setup the default gateway of this product.
0.0.0.0
IP address format
O
DNS Server Address Setup the DNS server of this product.
0.0.0.0
IP address format
O
Host Name
Setup a host name
nh.patlite.jp Enter a legitimate host name
Maximum 63 Characters
—
Please
The values for "Setting Option" in this manual has to have a valid entry, or can be left blank.
O Indicates the entry can be omissible, or any entry within the set parameters.
X Indicates the entry cannot be omissible. Enter a valid parameter.
– Indicates an entry which cannot be omitted, or abbreviated. The value has to be entered in
accordance to the customer's environment.