PATLITE NHL - Manual (Page 65)

65
4
4.13 Normal Mode Setup Screen
Set up the status of the Signal Tower for its normal operating condition.
[Setup Method]
1. Select the desired status for the Signal Tower to be at its normal operating condition.
2. Click the "Set" icon button to initiate the setup.
3. After the setup is complete, press the "Clear" switch on the body for the normal operating condition to be
displayed.
Fig. 4.13.1 Normal Mode Setup Screen
Table 4.13.1 Normal Mode Setup Parameters
Item Contents
Default
Value
Input
Parameter
Setting
Option
Signal
Tower Select from:
Red
Lighting
Amber
Lighting
Green
Lighting
Blue
Lighting
White
Lighting
Do not
light-up
— —
①
②