PATLITE NHL - Manual (Page 42)

42
4
4.2 Clock Setup Screen
The clock setup for this product can be done through a browser. The clock setup can be accessed through the
System Setup Screen (Fig. 4.2.1 Clock Setup Screen) from the default values as shown in Table 4.2.1.
Fig. 4.2.1 "Clock Setup" Screen
Table 4.2.1 Clock Setup Parameters
Item Contents
Default
Value
Input Parameter
Setting
Option
NTP Server Address Setup the NTP server address. Blank Server’s Host Name or IP address
Maximum of 63 characters
O
Time Calibration Interval Setup the interval to communicate
with an NTP server.
0
Half-width numbers from 0 to 1440
(minutes)
O
Two kind of clock setup methods are indicated below:
• Synchronizing with the PC clock time when logging in.
• Adjusting clock of this product when communicating with an NTP server.