5 network setup – PATLITE NHL User Manual

Page 18

2.5 Network Setup

The IP address at the time of factory shipments for this product is

192.168.10.1

To change the IP address, first log in from a personal computer (henceforth, written as “PC”) web browser to
access the settings for it.

2.5.1 Logging In

By logging in from a web browser, access can be made to various setups for this product.
In order to log in, the current IP address for this product needs to be entered into the address part of the web
browser. (Refer to Fig. 2.5.1)

Fig. 2.5.1 Login Screen

http://192.168.10.1/index.htm

When the login screen is displayed, go to the upper right of the screen where "Please Select Your Language" is
located to select the preferred language. Enter "patlite" in the password field, then click the "Logging In" button.
The default password is set to “patlite.” Please be sure to change the password to prevent any security breach-
ing.

2.5.2 Setting the IP Address

After logging in, a web setup tool screen will be displayed (Refer to Fig. 2.5.2). The set up item list is displayed
on the left-hand side of the screen.
Click "System Configuration" to display the system setup screen.

Fig. 2.5.2 Web Setup Tool Screen

Please

• If 10 minutes or more of no activity has elapsed after logging in, a time-out causes an

automatic log out. When that occurs, please log in again.

• If garbled characters occur and the screen is not displayed normally, change the character

code for Unicode (UTF-8) to correct it.

• To prevent from being setup in two or more places, this product does not support double-

The recommended browser should be equivalent to or higher than Internet Explorer 6

or Firefox 3.5.

Note

Click "System Configuration"

Select Language