PATLITE NHL - Manual (Page 53)

53
4
Table 4.8.1 RSH Command Setup Parameters
Item Contents
Default
Value
Input Parameter
Setting
Option
RSH Server
Function
Select Active/Inactive for the RSH server
function.
Active ― ―
RSH Alert Timer
Reset Function
Select “Shared” or “Separate” to control
the Signal Tower lights and buzzer
― ―
E-mail
Transmission
Select Active/Inactive for sending an E-
mail when a command is received.
Inactive ― ―
Subject
Select the subject title for the mail to be
transmitted.
1. Message ― ―
Message
Select the message text for the mail to be
transmitted.
1: ― ―
E-mail
Receiver
Select the recipient to send E-mail to. Undefined ― ―
TRAP
Transmission
Select Active/Inactive for the TRAP
transmission when an RSH Command is
received.
Inactive ― ―
Designated
Sender Address
Setup a designated address for a sender
when an RSH Command is recieved.
Active ― ―
Invalid Designated
Sender Address/
Common Login Name
IP Address
When the designated sender address
setup is not active, up to 16 accounts can
be used to notify senders when an RSH
Command is received.
Blank IP Address Format O
Sender IP Address The designated IP address used when a
command is executed.
Blank
Half-width alphanumeric char-
acter, period “.”, hyphen “-”
Maximum 16 Characters
O
Login Name
The login name used is entered to allow
command execution.
Blank
Half-width alphanumeric char-
acter, period “.”, hyphen “-”
Maximum 16 Characters
O