beautypg.com

10 application monitoring function – PATLITE NHL User Manual

Page 37

background image

37

3

3.10 Application Monitoring Function

By creating an additional transmission command for a customer's application, this product can monitor the

response of the application by receiving the data from it.

If data is not received within the monitoring period, it makes a judgement that the communication has become

abnormal, and at the time of the abnormality, sends a status change to the Signal Tower. After a generated

event, if data is received from the monitored candidate, it will detect a recovery from the abnormal operation.

Refer to "4.11 Application Monitoring Configuration Screen" for details on the setting method.

As an example, with a monitoring period of 30 seconds, the received data from the application is monitored.

1. After the setup is complete and it receives data from the address monitoring point, the monitoring will

commence.

2. If data is received within the monitoring period of 30 seconds, it will be judged as having no abnormalities.

3. However, if the data is not able to be received within the allotted period (30 seconds in this example), it

makes a judgment of abnormality.

Once judged as abnormal, the operation at the time of the detected abnormality is carried out.

4. If data is received from the application after detecting a generated event of abnormality, it will detect a

recovery from the abnormality.

The operation at the time of recovery from the abnormal condition will return to its monitoring condition

again.

Fig. 3.10.1 Detailed Example of Application Monitoring

Application Monitor

Side

Application Monitor

re-start

Application

Monitoring Period

Application Monitoring

lapsed time reset

When data couldn't be

received during a

monitor reception period

Application Monitoring

abnormal detection start

Monitoring Condition

Data

Transmission

Data

Response

Application Monitoring Period

Monitor Starting

Point

Monitoring Abnormal Condition

Monitoring Condition

When data was received

during the detection of an

abnormality

Application Monitor

Recovery Start Execution

Application Monitoring Period

Application Monitoring

Condition

NHL Side

Recovery from an abnormal operation can only occur if a monitored condition was

detected as abnormal.

Please