4 snmp setup screen – PATLITE NHL User Manual

Page 46

4.4 SNMP Setup Screen

With an SNMP, this product can communicate outside the community name for the notification of a TRAP, using
the SNMP SET/GET in reference to each item for this product, and generate the event with this product.

4.4.1 SNMP SET/GET

An SNMP SET/GET can be setup.

[Setup Method]
1. Select the "Active" radio button to enable the SNMP function.
2. Enter the SET/GET community parameter.

4.4.2 SNMP TRAP Transmission

An SNMP TRAP Transmission can be setup.

[Setup Method]
3. Select the "Active" radio button to enable the TRAP transmission function.
4. Enter the TRAP Transmission community parameter and the TRAP transmission frequency.
5. Enter in the TRAP Address column, the IP address for sending the TRAP notification to.
6. Click the "Set" button to activate the setup.

TRAP command which is transmitted when the TRAP is active

OID:

1.3.6.1.4.1.20440.4.1.6.3

Name: trapPatliteTrapReceived

Fig. 4.4.1 SNMP Setup Screen

①

②

③

④

⑤

⑥