PATLITE NHL - Manual (Page 19)

19
2
The network protocol can be changed on the system setup screen.
[Setting Method]
1. Please enter the new IP address for this product.
2. Set up the net mask, default gateway, etc. if needed.
3. After the changes are completed, click the "Set" button for the changes to take effect.
Fig. 2.5.3 System Setup Screen (for Manual Setup)
4. After the "Set" button has been clicked, then when the Network Reboot Screen is displayed, click the
"Network Reboot" button for the changes to take effect (Refer to Fig. 2.5.4).
5. The execution of the network setup changes takes about 20 seconds. After the waiting time elapses, click
"To the Login screen" to log back in (Refer to Fig. 2.5.1).
Fig. 2.5.4 Network Reboot Screen
2.5.3 Setup Verification
If the web browser address is reflecting the changed value of the IP address after clicking "To the Login
screen", the setup of the new IP address has been successful. However, in cases where the preset value of
other networks had been changed, be sure to enter the proper IP Address value where it was moved to in order
to verify it in the system setup screen.
①
②
②
③
④
⑤