PATLITE NHL - Manual (Page 61)

61
4
4.11 Application Monitor Setup Screen
Setup for monitoring an application. The data reception of the target is monitored.
If data is not received within the monitoring period, it detects the communication as being abnormal, and
generates an abnormality event. After a generated event, if data is received from the monitored candidate, it
will detect a recovery from the abnormal operation.
[Setup Method]
1. Select from screen number 1 to 4 to setup an application monitor.
2. Enter the address for the targeted monitor.
3. Enter the receiving port number.
4. Enter a device name.
5. Set up the monitoring period.
Operation Setting for Monitoring Abnormality
6. Setup the condition for the Signal Tower when a monitor abnormality is detected.
7. To send an E-mail when a monitor abnormality occurs, set the E-mail Sending to "Active".
When the E-mail Sending is activated
Register the subject and the message text to transmit. Then, select the recipient for the E-mail Sending.
8. When using the TRAP transmission, set to "Active".
Fig. 4.11.1 Application Monitor Setup Screen
①
⑥
⑤
④
③
②
⑦
⑧