PATLITE NHL - Manual (Page 21)

21
2
2.7 Operation Settings
2.7.1 Setting the Clock
The clock for this product can be set up. For setting the clock on this product, the following are two methods.
► Communicates with the PC clock to adjust the time when logging in.
► Communicates with an NTP server to adjust the time for this product.
Refer to "4.2 Time Setup Screen" for details on setting the time.
2.7.2 Normal Mode Setup
The normal state of operation of this product can be displayed by using the "Normal Mode" setup. When this
product is in its normal state of operation, the condition, such as the Green LED in the "ON" condtion, can be
indicated on the Signal Tower, once the setup is complete.
Refer to "4.13 Normal Mode Setup Screen" for setting up the "Normal Mode" operating status of this product."
Please
If the power supply is not applied for more than a day and a half, the generated time may be
cleared or delayed, and the clock should be reset again.
Note
If the normal operating condition does not require any status lights to stay on, then there is
no need to set this parameter up.