PATLITE NHL - Manual (Page 40)

40
4
4 Function Setup
The function setup is available in order to take advantage of the various functions. To access the settings, click the
setup items on the left-hand side of the Web Setup Tool to open the set up screen for the various functions.
Setup Category Setup Screen Setup Contents
Setup Menu
System Configuration Sets up the network parameters.
Clock Setup Sets up the time for this product.
User Authorization Configuration Sets up the login password for this product.
SNMP Configuration
Sets up the functions for the SNMP SET/GET and TRAP
transmission.
Socket Transmission Configuration
Sets up the ports to control the PHN Command and PNS
Command outputs.
E-mail Settings Setup for sending E-mail notifications.
E-Mail Message Settings
Setup for writing the message contents to be transmitted by
E-mail.
RSH Command Configuration
Setup for receiving the rsh command and to send the E-mail
when an rsh reception and TRAP transmission are executed.
Operation
Settings
TRAP Reception Configuration
The setup which controls the status condition when a TRAP
or TRAP reception is recieved.
Ping Monitor Configuration
The setup of the address for the monitored equipment and
the management when an abnormality is detected.
Application Monitoring Configuration The setup is to verify whether data can be received from the
monitored object.
“Clear” Control Configuration
The setup for sending an E-mail when the “Clear” switch is
pressed, and for the TRAP transmission setup.
Normal Mode Settings
A setting, such as turning on a Green LED Unit, to indicate a
normal condition.
“Test” Switch Settings
The setup for sending an E-mail when the “Test” switch is
pressed, and for the TRAP transmission setup.
NH Unit
Controls
Signal Tower Output Control The Signal Tower status is controlled from the browser.
Reinitialization The settings return to factory default values.
Reboot
Reboots this product after settings have been changed to put
them into effect.
Maintenance
Functions
Event Log The event log is displayed and can be downloaded.
Configuration Data Save/Load Setup The setup items can be saved as config data and reloaded at
any time.
Firmware Update The Firmware update function can be done from this screen.
Setup Table Entries
The list of items, their setup and operation contents, and the
current firmware version is displayed.
After the desired setup is completed, reboot this product by pressing the "reset"
switch or by disconnecting the power and reconnecting it.
Please