PATLITE NHL - Manual (Page 67)

67
4
4.15 Output Control Setting for Signal Tower Screen
Verify the current operating status, and output a condition status for the Signal Tower.
[Setup Method]
1. Check the current operating condition of the Signal Tower.
2. Select the desired outputs for the Signal Tower status in the "Output Control" column to operate it.
3. Click the "Execute Output" button. The Signal Tower output will reflect the setup performed in (2).
4. If the "Execute Clear" button is clicked, it will return to the "Normal Mode" status.
Fig. 4.15.1 Signal Tower Output Control Screen
Table 4.15.1 Signal Tower Output Control Setup Parameters
Item Contents
Default
Value
Input
Parameter
Setting
Option
Red Select from: OFF- ON- Lighting- Flashing1- Flashing2- No Flashing- No Change ― ― ―
Amber Select from: OFF- ON- Lighting- Flashing1- Flashing2- No Flashing- No Change ― ― ―
Green Select from: OFF- ON- Lighting- Flashing1- Flashing2- No Flashing- No Change ― ― ―
Blue Select from: OFF- ON- Lighting- Flashing1- Flashing2- No Flashing- No Change ― ― ―
White Select from: OFF- ON- Lighting- Flashing1- Flashing2- No Flashing- No Change ― ― ―
Buzzer Select from:Pattern1- Pattern2- Pattern3- Pattern4- Stop ― ― ―
① ②
③
④