GW Instek GDS-1000A-U Series User Manual - Manual (Page 93)

CONFIGURATION
93
Procedure 1. Press the Channel key. CH 1
2. Press F5 to toggle between
Expand Center and Expand
Ground.
Expand
Center
3. To change the vertical scale,
turn the VOLTS/DIV knob;
left (down) or right (up).
VOLTS/DIV
The vertical scale indicator on
the bottom left of the display
changes accordingly.
Inverting the waveform vertically
Procedure 1. Press the Channel key. CH 1
2. Press Invert. The waveform
becomes inverted (upside
down) and the Channel
indicator in the display
shows a down arrow.
Invert
Off
Original Inverted