GW Instek GDS-1000A-U Series User Manual - Manual (Page 78)

GDS-1000A-U Series User Manual
78
C
ONFIGURATION
The Configuration chapter describes how to
configure panel settings to make measurements
and observations suited to the application needs.
Acquisition
The acquisition process samples the analog input signals and
converts them into digital format for internal processing. You may
select the normal, average, or peak detect acquisition mode.
Selecting the acquisition mode
Procedure 1. Press the Acquire key. Acquire
2. Select the acquisition mode
between Normal, Average
and Peak Detect. Normal
Peak
Detect
Average
Range Normal All of the acquired data is used to
draw the waveform.