GW Instek GDS-1000A-U Series User Manual - Manual (Page 123)

SAVE/RECALL
123
USB 1M Save to the USB flash drive with a
1M waveform memory length. For
2 channel operation only.
USB 2M Save to the USB flash drive with a
2M waveform memory length. For
single channel operation only.
6. Press Save to confirm
saving. When completed, a
message appears at the
bottom of the display. Save
Note
The file will not be saved if the
power is turned off or the USB flash
drive is removed from the USB
port.
It takes approximately 1 min to save
a 2M waveform to the USB drive in
fast mode. Detailed mode may take
over 10 times longer depending on
the speed of the USB flash drive.
7. The current waveform(s) (*.CSV), setup file
(*.SET) and display image (*.BMP) are saved to
a directory (ALLXXXX).
File utilities To edit the USB drive contents
(create/ delete/ rename files
and folders), press File Utilities.
For details, see page 113.
File
Utilities