Avigilon ACC Enterprise Version 5.2.2 - Manual (Page 97)

1. In the Setup tab, select the camera you want to edit and click .
Figure 73: Microphone dialog box
2. Select the Enable check box to enable audio recording from microphones connected to the camera.
3. Enter a name for the microphone.
4. In the Source: drop-down list, select the audio input source.
5. In the Gain: drop-down list, select the amount of analog gain that is applied to the audio input. The higher
the dB setting, the louder the volume.
6. In the Link to Camera(s): area, select cameras to link to this audio.
7. Click OK.
Speaker
Use the Speaker dialog box to change the settings for any audio output device that is connected to a camera.
You can also link the audio to other cameras.
Speaker 97