Avigilon ACC Enterprise Version 5.2.2 - Manual (Page 123)

1. Create all the PTZ presets you need for this tour.
2. In the PTZ Controls pane, select a tour number then click . The Edit PTZ Tour dialog box is displayed.
Figure 87: Edit PTZ Tour dialog box
3. In the Edit PTZ Tour dialog box, give the tour a name.
4. In the Tour Pause Duration: field, enter the amount of time before a tour repeats. Tours repeat until
manually stopped, or until other PTZ controls are used.
5. In the Tour Mode: drop-down list, select one of the following:
l
Sequential: the PTZ camera will go to each preset in the set order.
l
Random: the PTZ camera will go to each preset in random order.
6. Select the Set as default tour check box if you want this tour to run automatically.
l
The Default Tour Idle Start Time: field is now enabled. Enter the amount of time the PTZ camera
must be idle before this tour automatically starts.
Programming PTZ Tours 123