Avigilon ACC Enterprise Version 5.2.2 - Manual (Page 82)

Multicast to set up redundant recording to multiple servers.
Use the default generated IP Address:, TTL:, and Base Port:, or enter your own values.
5. Click OK.
Image and Display
Use the Image and Display dialog box to control a camera’s display settings for live and recorded video.
NOTE: The dialog box may appear differently depending on the camera. Options that are not supported by the
camera will be disabled or hidden.
Changing Image and Display Settings
NOTE: The dialog box may appear differently depending on the camera. Options that are not supported by the
camera will be disabled or hidden.
1. In the Setup tab, select the camera you want to edit and click .
2. In the Image and Display dialog box, make the required changes to adjust the camera's image settings. A
preview of your changes is displayed in the image panel.
Tip: Use the Maximum Exposure:, Maximum Gain:, and Priority: options to control low light behavior.
Figure 63: Image and Display dialog box
82 Image and Display