Avigilon ACC Enterprise Version 5.2.2 - Manual (Page 94)

Setting Up Digital Inputs
1. In the Setup tab, select the camera you want to set up and click .
2. In the Digital Inputs: area, select an input.
Figure 71: Digital Inputs and Outputs dialog box
3. Enter a Name: for the digital input.
4. In the Recording Duration: area, select one of the following:
l
Select Follow event to record the entire digital input event.
l
Select Maximum time: to limit the recording time.
5. Enter the Pre-Event Record Time: and Post-Event Record Time:.
6. Select the digital input's default Circuit State: .
7. Select cameras to link to this digital input.
If the Recording Schedule is configured to record digital inputs, the cameras selected in the Link to
94 Setting Up Digital Inputs