Avigilon ACC Enterprise Version 5.2.2 - Manual (Page 184)

Keyboard Commands
Use any of the keyboard commands below to help you navigate the Avigilon™ Control Center Client software.
The Key Combination column shows the commands used on a standard keyboard, while the Keypad
Combination column shows the commands used on an Avigilon USB Professional Joystick Keyboard.
NOTE: Some features are not displayed if the server does not have the required license, or if you do not have
the required user permissions.
Image Panel & Camera Commands
Command Key Combination
Keypad Combination (Image Panel
buttons)
Select an image panel
Image panel # is displayed
after pressing the first key.
* + <image panel #> + Enter
+ <image panel #> +
Add a camera to the View
The camera's logical ID is
required.
/ + <logical ID> + Enter
+ <logical ID> +
Select the next image panel
Tab
Select the previous image
panel
Shift + Tab
Clear image panel selection * + 0 + Enter
+ 0 +
Remove camera from the
selected image panel
Backspace
Maximize/Restore the
selected image panel
Ctrl + E
Replay 30 seconds Ctrl + ,
Replay 60 seconds Ctrl + .
Replay 90 seconds Ctrl + /
Add a bookmark for
selected camera
NOTE: For recorded video
only.
Ctrl + B
Start/Stop manual recording
for the selected camera
R
184 Keyboard Commands