LumaSense Technologies INNOVA 1314i - Manual (Page 66)

Chapter 5
______________________________________________________________________
_____________________________________________________________________________
BE6030-13 1314i Photoacoustic Gas Monitor LumaSense Technologies A/S
Page 66 of 199
8. Press ¿ to accept the time.
When Step 8. has been completed the display then moves to the
previous head of the set-up “tree”.
9. Press p three times. The screen display shows the following text:
10. Press SET-UP to exit the set-up function.
5.4.2 Adjusting the Sound Level
During certain operations or, for example, when an incorrect push-
button is pressed, the Monitor emits a “beep”. You choose the
volume of the Monitor’s “beep”. The volume of the “beep” is
expressed on a scale from 0 (no “beep”) to 3 (loudest “beep”). Table
5.3 provides details of the available choices and the default value of
this parameter.
Table 5.3 The available choices and the default value of the
Monitor’s “beep”
Display Text Available Choices Default Value
ENTER SOUND VOLUME 0 0, 1, 2, 3 1
To set the volume:
1. Press SET-UP.
2. Press S3 S1 S1 S2 .
The following screen picture appears:
3. To change the volume, press
¿ .
SELECT SET UP BRANCH
MEASUREMENT FORMAT CONFIGURATION
SOUND VOLUME 1
PRESS ENTER TO CHANGE VALUE