LumaSense Technologies INNOVA 1314i - Manual (Page 53)

Chapter 4
______________________________________________________________________
_____________________________________________________________________________
BE6030-13 1314i Photoacoustic Gas Monitor LumaSense Technologies A/S
Page 53 of 199
After scrolling through the list of individual measurement results for
water vapour the following screen displays appear:
SAMPLING IS CONTINUOUS
MONITORING PERIOD IS NOT PRE-SET
COMPENSATION FOR WATER VAP.
INTERFERENCE
MONITORING TASK STARTED 2014-01-16 09:50
MEASUREMENT CHAMBER TEMPERATURE 39.6°C
SAMPLE INTEGRATION TIME W: 5s
A: 5s B:___s C:___s D:___s E:___s
A:Carbon monoxide B:__________ C:___________
D: _________ E:__________ W: WATER VAP
DATA IN DISPLAY MEMORY RECORDED FROM
2014-01-16 09:50 TO 2014-01-16 10:04
Note that the screen showing the overview of gas concentrations
measured during any particular measurement cycle is no longer
shown when the monitoring task has been stopped.
2. Press u.
This causes the following text to appear on the screen:
FILTER A USED TO MEASURE
(the name of the gas being measured by Filter A will appear here)
3. Press q to scroll through the following data displays:
GAS A: MAX 84.5E+00 m 8.03+00
ALARM 1________ MIN 7.42E+00 s 2.36E+00