LumaSense Technologies INNOVA 1314i - Manual (Page 10)

Chapter 1
______________________________________________________________________
________________________________________________________________________________
BE6030-13 1314i Photoacoustic Gas Monitor LumaSense Technologies A/S
Page 10 of 199
The display above is used continuously through-out this manual. It
assists you displaying the text on screen and by indicating which of the
push-buttons can and should be pressed.
In general, the push-buttons shown above are used to navigate through
the various modes possible within the 1314i but are described in more
detail below:
These push-buttons are illustrated as S1, S2 and S3. On the 1314i they
correspond to the key and their position on the instrument.
These select push-buttons enable you to select one of the options
displayed.
This group of 5 push-buttons are referred to in this manual collectively
as the direction keys. The symbols below are used to simplify the
instruction in this manual.
▲ & ▼ enable you to increase & decrease numbers, respectively, or to
go to the Previous & Next Displays, respectively.
◄ & ► enable you to move across number fields or go to the Previous &
Next gases, respectively.
¿ , depending on the situations, acts as an “Enter” or “Go To Head” key.
Memory Function push-buttons are always represented with the name of
the push-button enclosed in a box which is shaded-in.
SELECT SET-UP BRANCH
MEASUREMENT FORMAT CONFIGURATION
S1 S2 S3