LumaSense Technologies INNOVA 1314i - Manual (Page 111)

Chapter 9
______________________________________________________________________
_____________________________________________________________________________
BE6030-13 1314i Photoacoustic Gas Monitor LumaSense Technologies A/S
Page 111 of 199
9.3 Management of Data in Background Memory
The monitor has to be operated in Memory mode by pressing the
MEMORY push-button. The following text appears on the screen:
9.3.1 Storing Data in Background Memory
When data is to be copied from Display Memory into Background
Memory:
Press S1
If some data has already been stored in the Background Memory and
you cannot remember which locations have been occupied (used),
press the INFO push-button to find out which locations are occupied
and what percentage of the Background Memory has been used (see
section 9.3.4 ). Use the direction keys to select the desired location
number. When the chosen location number is on the screen, press
S2 to accept the position.
Press Memory to exit.
9.3.2 Recalling Data from Background Memory
To recall data stored in Background Memory to Display Memory:
1. Press Memory S2.
SELECT MEMORY FUNCTION
STORE RECALL DELETE
LOCATION NUMBER 1
PRESS ENTER TO CHANGE VALUE
LOCATION NUMBER 1
PRESS ENTER TO CHANGE VALUE