LumaSense Technologies INNOVA 1314i - Manual (Page 6)

Safety Considerations
______________________________________________________________________
________________________________________________________________________________
BE6030-13 1314i Photoacoustic Gas Monitor LumaSense Technologies A/S
Page 6 of 199
Environmental Condition for transport and storage:
Temperature: -25 to +55ºC
Relative Humidity: 0 to 80% RH
Atmospheric Pressure: 800 to 1060 hPa
Warnings!
· Avoid water condensation in the instrument.
· Switch off all equipment before connecting or disconnecting their
digital interface. Failure to do so could damage the equipment.
· Whenever it is likely that correct function or operating safety of the
apparatus has been impaired, the apparatus must be made
inoperative and secured against unintended operation.
· Any adjustment, maintenance and repair of the open apparatus
under voltage must be avoided as far as possible and, if unavoidable,
must be carried out only by trained personnel.
· If a fault is reported by the monitor that indicates correct function of
the instrument may be impaired, consult your local LumaSense
Technologies representative. Under no circumstances should repair
be attempted by persons not qualified in service of electronic
instrumentation.