beautypg.com

LumaSense Technologies INNOVA 1314i User Manual

Page 20

background image

Chapter 2

______________________________________________________________________

_____________________________________________________________________________

BE6030-13

1314i Photoacoustic Gas Monitor

LumaSense Technologies A/S

Page 20 of 199

5. Here you can change the 4 individual numbers in the IP address

by using the ▲ and ▼ keys. Each of the 4 individual numbers can

be set in the range from 000 to 255.

You can step between the 4 individual numbers in the IP address

by using the ◄ and ► keys.

In case you want to return to the start value of the IP address

press the S1 (CANCEL) key. In case you want to return to the

default stored value of the IP address press the S3 (DEFAULT)

key.
When you have set the IP address, press the

¿

key. The screen

display now shows the following text.

6. Here you can set the IP port number for the Ethernet

communication. This normally does not need to be changed. If
you want to change the IP port number press the

¿

key. If the IP

port numbers does not need to be changed, press the ▼ key and

you will proceed to the below step 8. If you selected to change the

IP port number the screen display now shows the following text.

7. Here you can change the IP port number by using the ▲ and ▼

keys. The port number can be set in the range from 0 to 32767.

In case you want to return to the start value of the IP port

number press the S1 (CANCEL) key. In case you want to return to

the default stored value of the IP port number press the S3

(DEFAULT) key.
When you have set the IP port number, press the

¿

key. The

screen display now shows the following text.

8. In case you want the 1314i gas monitor to be able to

communicate only with a certain PC on the local network, you can

set the IP address of this PC as the protected IP address. This can

be desired due to security reasons so no other PC is able to

communicate with the 1314i gas monitor.

If no protection is desired the protected IP address should be set

to a value of 000.000.000.000.

1314i'S IP PORT NUMBER: 23

PRESS ENTER TO CHANGE VALUE

PROTECTED IP ADDRESS 000.000.000.000

PRESS ENTER TO CHANGE VALUE

1314i'S IP PORT NUMBER: 23

CANCEL DEFAULT