LumaSense Technologies INNOVA 1314i - Manual (Page 21)

Chapter 2
______________________________________________________________________
_____________________________________________________________________________
BE6030-13 1314i Photoacoustic Gas Monitor LumaSense Technologies A/S
Page 21 of 199
If you want to change the protected IP address, press the ¿ key.
If the protected IP address does not need to be changed, press
the ▼ key and you will proceed to the below step 10.
If you selected to change the protected IP address the screen
display now shows the following text.
9. Here you can change the 4 individual numbers in the protected IP
address by using the ▲ and ▼ keys. Each of the 4 individual
numbers can be set in the range from 000 to 255.
You can step between the 4 individual numbers in the protected IP
address by using the ◄ and ► keys.
In case you want to return to the start values of the protected IP
address press the S1 (CANCEL) key. In case you want to return to
the default stored value of the protected IP address press the S3
(DEFAULT) key.
When you have set the protected IP address, press the
¿ key.
If you previously selected that the IP address NOT to be set by the
DHCP server you will proceed to the below step 11.
If you instead selected that the IP address to be set by the DHCP
server, the screen display now shows the following text.
10. Here the IP address of the 1314i, which has been assigned by the
DHCP server, is displayed. This IP address can be used to
manually set Ethernet communication in a PC application, which
accesses the 1314i gas monitor.
Press the S2 (ACCEPT) key to accept.
11. This concludes the setup of the Ethernet parameters of the 1314i
gas monitor.
Press the SET-UP key to leave the setup.
2.6.2 Display the Homepage of the gas monitor
The homepage of the 1314i gas monitor can be displayed if the gas
monitor is connected to a Ethernet network.
In section 2.6.1 it is explained how to set-up the Ethernet
parameters in the 1314i gas monitor.
PROTECTED IP ADDRESS 000.000.000.000
CANCEL DEFAULT
CURRENT DHCP ADDRESS 192.168.000.062
ACCEPT