LumaSense Technologies IS 12-Al/S User Manual
LumaSense Technologies Tools
This manual is related to the following products:
Table of contents
Document Outline
- 1 General
- 2 Introduction
- 3 Controls and Installation
- 4 Instrument settings
- 5 Parameters
- 5.1 Emi (emissivity )
- 5.2 Exposure Time (t90)
- 5.3 Clear time of the maximum / minimum value storage (tCL)
- 5.4 FROM / TO (beginning and end of sub range)
- 5.5 Analog Output (0 / 4 mA)
- 5.6 SETP (limit contacts)
- 5.7 Temperature display in °C or °F
- 5.8 Digital Inteface (RS)
- 5.9 Address
- 5.10 Baud Rate (kBaud)
- 5.11 Test Current Output (10 mA)
- 5.12 Wait Time
- 5.13 Switch Contact
- 6 Software InfraWin
- 7 Maintenance
- 8 Troubleshooting
- 9 Data format UPP (Universal Pyrometer Protocol)
- 10 Reference numbers
- Index