Yokogawa Button Operated MV2000 - Manual (Page 29)

1-22 M-4660
Report Data (/M1 and /PM1 options)
You can display report data stored in the internal memory.
For operating instructions, see section 5.5.
Displayed report data number/number of report data entries in internal memory
Start: Start date and time
Timeout: Report date and time
Channel number
Unit
Report data status
Indicates whether any of the following
occurred during the report interval.
E: Error data
O: Overflow data
P: Power failure
C: Time adjustment
B: Burnout
Average, maximum, minimum, sum, or instantaneous value
Report type
Stacked Bar Graph (/M1 and /PM1 options)
You can display the report data of each report group in a stacked bar graph.
For operating instructions, see section 5.6.
For information on report groups, see section 10.5.
• Displayed Data Type
The type of data that is displayed is determined by the report type, which is set using
the report function.
Displayed Data Report Type
Hourly + daily Hourly, or hourly + daily
Daily + weekly Daily + weekly
Daily + monthly Daily, or daily + monthly
Daily sum of all channels and the daily
sums of all report groups
If you select a bar graph, the sum of the hour
selected with the cursor will be displayed.
Hourly transition of report group sums (bar graph).
Daily sums (bar graph)
Example: Hourly + daily display
• Display Modes
You can switch the bar graph between single graph and dual graph display.
Single graph display Dual graph display
1.4 Display