beautypg.com

Yokogawa Button Operated MV2000 User Manual

Page 232

background image

10-18

M-4660

• Stopping Computation
• Stopping Computation and Memory Sampling at the Same Time

1.

Press START/STOP.

A confirmation dialog box opens.

2.

Select Mem+Math, and then press DISP/ENTER.

Memory sampling and computation stop, and the computation icon in the status display
section disappears.

• Stopping Computation Only

1.

In Operation Mode, press FUNC.

The function menu appears.

2.

Press the Math stop soft key.

Computation stops, and the computation icon in the status display section disappears.

Note

When computation is stopped, the computed data of the computation channel is held at the
value that existed immediately before the computation was stopped. If memory sampling is in
progress, the held value is recorded.

• Resetting the Computed Results of All Computation Channels

You can carry out this operation regardless of whether or not computation is in

progress.

1.

In Operation Mode, press FUNC.

The function menu appears.

2.

Press the Math reset soft key.

The computed results of all computation channels are reset.

• Releasing the Computation Data Dropout Display

You can carry out this operation when a computation data dropout occurs. When a

computation data dropout occurs, the computation icon turns yellow.

1.

In Operation Mode, press FUNC.

The function menu appears.

2.

Press the Math ACK soft key.

The computation icon returns to white.

* Math ACK appears in the function menu only when a computation data dropout occurs.

Note

A computation data dropout occurs when the MV cannot process computation within a scan
interval. If computation data dropout occurs frequently, reduce the load on the CPU by reducing
the number of computation channels or by setting a longer scan interval. If a computation data
dropout occurs during memory sampling, the data immediately before the dropout is recorded
as the computed data of the scan interval in which the dropout occurred.

10.5 Generating Reports

This manual is related to the following products: