Yokogawa Button Operated MV2000 - Manual (Page 147)

5-31 M-4660
Screen Operations
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
5.11 Using the 4-Panel Display (RD-MV2000 only)
This section explains how to use the 4-panel display.
For an explanation of this display, see section 1.4.
Procedure
• Opening the Display
1. Press DISP/ENTER to open the display selection menu.
2. Use the arrow keys to select 4Panel and then select MIX, ALL TREND, ALL
DIGITAL, or ALL BAR. Press DISP/ENTER. If you have changed the display
names, select the name that the display was changed to (see “Changing the
4-Panel Display Configuration Names” on the next page for details).
The selected display appears.
• Switching between Displays
Press the right arrow key to switch from MIX, to ALL TREND, to ALL DIGITAL, to ALL
BAR, to MIX and so on. Press the left arrow key to switch displays in the opposite
order. If you have changed the display names, select the name that the display was
changed to (see “Changing the 4-Panel Display Configuration Names” on the next
page for details).
• Changing the 4-Panel Display Configurations
Perform these operations while in the 4-panel display.
1. Press DISP/ENTER.
The title of one of the four displays will turn blue.
2. Use the arrow keys to move to the display you want to change (the display with
the blue title is the selected display).
The selected area’s
heading is displayed
in dark blue.
3. Press DISP/ENTER to open the display selection menu.
4. Use the arrow keys to select a new display.
5. Press DISP/ENTER to assign the new display to the old display’s location.
To close the menu without changing the display, press ESC.
• Registering a New Display Configuration
Perform the operation outlined under “Changing the 4-Panel Display Configuration
Names” on the next page.
* If you do not perform this operation and switch to another display, the changes made to the
current display configuration will not be retained.