Yokogawa Button Operated MV2000 - Manual (Page 105)

4-11 M-4660
Measurement and Recording
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
• Saving Manually (collectively storing unsaved data)
Perform this operation when Auto save is set to Off (see section 4.2 for details).
You can save to a CF card or to USB flash memory.
For instructions on how to save to USB flash memory, see section 4.10.
1. Insert the CF card.
A confirmation window containing the message “There is data which is not saved to media.
Do you want to store to media?” appears.
The CF card icon appears in the status display section.
2. Select Yes, then press DISP/ENTER. A menu appears.
The unsaved data in internal memory will be saved to an external storage medium.
3. Follow these steps to remove the external storage medium.
Press FUNC (to display the Function menu) > Media eject soft key > CF soft key.
When the message “Media can be removed safely” appears, remove the storage
medium.
Note
• If there is not enough space on the storage medium, the message “Not enough free space
on media” appears, and the data is not saved. When this message appears, switch to
another external storage medium and try saving again.
• You cannot cancel a data save operation as it is taking place.
• Stopping Recording (Memory stop)
1. Press START/STOP. A confirmation window appears.
2. Select Yes using the arrow keys, and then press DISP/ENTER.
If the MV is equipped with computation functions (/M1 and /PM1 options), select
Mem+Math or Memory and press DISP/ENTER.
The internal memory icon in the status display section changes to the icon that indicates
that there is no memory sampling.
• Using Keys to Save Selected Data or All Data in Internal Memory
See section 5.9.
4.4 Starting/Stopping Recording and Saving Measured Data