Yokogawa Button Operated MV2000 - Manual (Page 126)

5-10 M-4660
ALL CHANNEL: Displays the waveforms of all channels.
GROUP CHANNEL: Displays the waveforms of the channels
registered to groups.
CURSOR TIME ON: Displays the time at the cursor position
in the lower right.
CURSOR TIME OFF: Displays the date/time of the data at the
right edge of the screen.
RELATIVE TIME: Shows the time that has elapsed since
memory start.
ABSOLUTE TIME: Shows the time when data was recorded.
DIGITAL MAX/MIN: Displays the maximum and minimum
values at the cursor point as well as the
maximum and minimum values within the
screen, in the digital value display area.
CURSOR VALUE: With display data, shows the maximum
data value at the cursor position. With
event data, shows the data at the cursor
position.
Group name: Displays the group.
ALARM SUMMARY: Displays the alarm summary in the
loaded data file.
Switches to the specified display.
Returns to the display that was shown before the historical trend.
Adjusts the display span of the selected channel.
MESSAGE SUMMARY: Displays the message summary in the
loaded data file.
INFORMATION: Displays the information of the loaded
data file.
TREND HISTORY submenu
MESSAGE DISP2: Switches to message display 2.
MESSAGE DISP1: Switches to message display 1.
SCALE ON: Displays a scale.
SCALE OFF: Clears the scale.
AUTO SCALE
No AUTO SCALE display.
OFF
Displays the trend waveform and scale markers of the selected
channel in front of all the others.
TOP CHANNEL
FINE GRID ON: Displays a fine grid.
FINE GRID OFF: Clears the fine grid.
AUTOZONE ON: Displays trend waveforms separately
by assigning display areas (zones) to
the set channels.
AUTOZONE OFF: Displays trends using the set range.
EXPAND: Enlarges one of the four panels in the 4-panel
display (MV2000 only).
4. Press DISP/ENTER to change the display setting.
To close the menu without changing the display, press ESC.
5.3 Displaying Previously Measured Data (TREND HISTORY)