Watlow Series 998 - Manual (Page 83)

WATLOW Series 998 User’s Manual 5.15 Operation Menus, Chapter 5
Operation-PID B
Reset, Output 1B or 2B
Adjust the control action to eliminate the offset or droop between the
set point and the actual process temperature for PID channel B out-
puts. When set to [```0] reset is disabled.
[rE1B] This prompt appears only if [`dFL] (Calibration Menu) is set to
[``US] and [Pb1b] is not set to [```0].
Default
↓
[`)00] … [9(99] repeats / min.
[rE1b] [rE1b]
Integral, Output 1B or 2B
Adjust the control action to eliminate the offset or droop between the
set point and the actual process temperature for PID channel B out-
puts. When set to [```0] integral is disabled.
[It1b] This prompt appears only if [`dFL] (Calibration Menu) is set to
[``S1] and [Pb1b] is not set to [```0].
Default
↓
[`)00] … [9(99] min. / repeat
[It1b] [It1b]
[rE1b]
[rE2b]
[It1b]
[It2b]