Watlow Series 998 - Manual (Page 2)

Using the Manual
NOTE:
Details of a “Note”
appear here in the
narrow box on the
outside of each
page.
CAUTION:
Details of a
“Caution” appear
here in the narrow
box on the outside
of each page.
WARNING:
Details of a
“Warning” appear
here in the narrow
box on the outside
of each page.
Safety Information
We use note, caution and warning symbols throughout this book to draw
your attention to important operational and safety information.A bold text
“NOTE” marks a short message in the margin to alert you to an important
detail.
A bold text “CAUTION” safety alert appears with information that is
important for protecting your equipment and performance. Be especially
careful to read and follow all cautions that apply to your application.
A bold text “WARNING” safety alert appears with information that is
important for protecting you, others and equipment from damage. Pay
very close attention to all warnings that apply to your application.
The safety alert symbol, ç, (an exclamation point in a triangle) precedes
a general CAUTION or WARNING statement.
Technical Assistance
If you encounter a problem with your Watlow controller, review all of your
configuration information for each step of the setup to verify that your
selections are consistent with your applications.
If the problem persists, an Application Engineer can discuss your applica-
tion with you.
Before calling, please have the complete model number and user’s manu-
al available. You can get technical support by dialing 507/494-5656, 7
a.m. to 7 p.m. Central Standard Time.
Your Feedback
Your comments or suggestions on this manual are welcome, please send
them to: Technical Writer, Watlow Controls, P.O. Box 5580, Winona, MN
55987-5580, Phone: (507) 454-5300, Fax: (507) 452-4507. The Series
998 User’s Manual
is copyrighted by Watlow Winona, Inc., © February
2000, with all rights reserved. (1832)