Output 4, Alarm 4, Ot4] [`al4 – Watlow Series 998 User Manual

Page 55: Setup-output

Text mode
Original mode

WATLOW Series 998 User’s Manual

4.27

Setup Menus, Chapter 4

Setup-Output

Output 4

Set the alarm type for output 4.

• [`AL4] de-energizes output 4 in an alarm condition.

• [AL4n] energizes output 4 in an alarm condition.

[`Ot4] This prompt appears only on controllers equipped with output 4
hardware for a relay (99__-____-_B__, or 99__-____-_D__, or 99__-____-_E__
or 99__-____-__K__) or switched dc (99__-____-_C__).

Default

↓

[`AL4]

[AL4n]

[``no]

[`Ot4]

Alarm 4

Select the alarm channel and type for alarm 4.

[`AL4] This prompt appears only on controllers equipped with output 4
hardware for a relay (99__-____-_B__, or 99__-____-_D__, or 99__-____-_E__
or 99__-____-_K__) or switched dc (99__-____-_C__), and with [`Ot4] set to
[`AL4] or [AL4n].

Default

↓

[`PrA]

[`deA]

[`Prb]

[`deb]

[`AL4]

[`Ot4]

[`AL4]