Process b, Output 3, Prcb] [`ot3 – Watlow Series 998 User Manual

Page 51: Setup-output

Text mode
Original mode

WATLOW Series 998 User’s Manual

4.23

Setup Menus, Chapter 4

Setup-Output

Process B

Select the process range for output B.

[Prcb] This prompt appears only on controllers equipped with output B
process hardware (99__-___F-____).

Default

↓

4-20mA

0-20mA

0-5V

1-5V

0-10V

(dc)

[4-20]

[0-20]

[`0-5]

[`1-5]

[0-10]

[Prcb]

Output 3

Set the alarm type for output 3.

• [`AL3] to de-energize output during alarm condition.

• [AL3n] to energize output during alarm condition.

[`Ot3] This prompt appears only on controllers equipped with output 3
hardware for a relay (99__-____-B___, or 99__-____-J___ or 99__-____-K___)
or switched dc (99__-____-C___).

Default

↓

[`AL3]

[AL3n]

[``no]

[`Ot3]

[Prcb]

[`Ot3]

NOTE:
See Chapter 7 for
more information on
alarms.