Process 3, Retransmit low limit, Prc3] [`arl – Watlow Series 998 User Manual

Page 58: Setup-output

Text mode
Original mode

4.30

WATLOW Series 998 User’s Manual

Setup Menus, Chapter 4

Process 3

Select the range for the retransmit signal at output 3.

[Prc3] This prompt appears only on controllers equipped with output 3
retransmit hardware (99__-____-M___ or 99__-____-N___) and with [Aout]
not set to [``no].

Default

↓

4-20mA

0-20mA

0-5V

1-5V

0-10V

(dc)

[4-20]

[0-20]

[`0-5]

[`1-5]

[0-10]

[Prc3]

Retransmit Low Limit

Select the low limit for the retransmit signal at output 3.

• The default value is equal to [`rL1] or [`rL2] (in the Input Menu)

depending on whether [Aout] is set to [PrcA] or [Prcb].

[`ArL] This prompt appears only on controllers equipped with retransmit
hardware (99__-____-M___ or 99__-____-N___) and with [Aout] not set to
[``no].

[-999]

…

[`ArH]

[`ArL]

Setup-Output

[Prc3]

[`ArL]

NOTE:
See Chapter 8 for
more information on
retransmit.