beautypg.com

Chapter 4 the setup menus, Navigating, Chapter 4 the setup menus 4.1 – Watlow Series 998 User Manual

Page 29: Navigating the setup menus, Inpt, Otpt, Glbl

background image

TL

W

WA

PROCESS

1A

2A

1B

2B

CH A

CH B

DISPLAY

SERIES 998

MODE

AUTO

MAN

TL

W

WA

PROCESS

DISPLAY

MODE

1A

2A

1B

2B

CH A

CH B

SERIES 998

AUTO

MAN

WATLOW Series 998 User’s Manual

4.1

Setup Menus, Chapter 4

Navigating the Setup Menus

To reach the Setup Menus, begin in the Display Loop and press both the
Up-arrow > and Down-arrow < keys for three seconds. The Setup
Menu prompt [`SEt] will appear in the lower display, and the Input Menu
prompt [InPt] will appear in the upper display. The four Setup Menus
are: Input [InPt]; Output [OtPt]; Global [GLbL]; and Communications
[COM]. Use the Up-arrow > or Down-arrow < key to select a menu
and the Mode key µ to step through a menu. The Communications
Menu appears only on units equipped with the data communications
option (99__-____-_R__ or 99__-____-_S__).

You will not see every prompt in any of these menus. The unit’s configura-
tion and model number determine which prompts appear. After stepping
through each menu, the Series 998 returns to the Setup Menu prompt.
Use the Up-arrow or Down-arrow key to select the next menu, or use the
Mode key to advance through the same menu again. To move backwards
through the menu hold the Mode key down and press the Up-arrow key.
Use the Up-arrow or Down-arrow key to change the prompt setting.

Refer to the Appendix for model number options. For additional informa-
tion about communications and the communications prompts, refer to the
supplemental manual Data Communications with the Watlow Series 988
Family of Controllers.

Figure 4.1 -
Navigating the
Setup menus.

[Inpt]

[`SEt]

[Otpt]

[`SEt]

[COM]

[`SEt]

[GLbl]

[`SEt]

>

>

>

>

❶ Begin in the Display Loop, and press the Up-arrow
> and Down-arrow < keys simultaneously to
reach the Setup menus.

❷ Press the Up-arrow key > to select one of the
Setup menus.

NOTE:
The lockout DIP
switch hides the
Setup menus. See
Chapter 1.

NOTE:
Press the Display
key

to return to

the Display Loop
from any point in
any menu.

Input

Output

Global

Communications

Menu

Menu

Menu

Menu

p. 4.2

p. 4.16

p. 4.32

p. 4.38

Chapter 4 The Setup Menus