Teledyne LeCroy Summit T24 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 99)

Summit T24 PCI Express Multi‐Lane Protocol Analyzer User Manual 87
Timer Teledyne LeCroy
5.23.1 How to Set a Timer
Timers are events and you can add a timer to the Global State or the Sequence State as an
event by doing the following:
Right‐click in the blue space in the Global or Sequence State and New Event > Timer.
Figure 5.44: Setting Global and Sequence State Timer Events
5.23.2 How to Start or Reset a Timer
You can Start or Reset the Timer in the Global State and in the Sequence State by
performing the following steps:
1. Open the Recording Rules page, select an event, and drag it to the Global State or
Sequence cells. For details on these steps (see “Filter Out” on page 90) .
2. Right‐click on an event and select Specify Actions > Start Global Timer > Global
Timer A or Timer B from the menu (see Figure 5.45 on page 88 ).