Teledyne LeCroy Summit T24 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 80)

Teledyne LeCroy Global State and Sequence States
68 Summit T24 PCI Express Multi‐Lane Protocol Analyzer User Manual
5.18.1 Global State
The Global State is active all the time. The Summit T24 Analyzer tracks all the Events and
Actions defined in the Global State throughout the recording. In the Global State the Link
State, Ordered Set (except TS1 and TS2), Errors, Counter and the Timer use Basic Resources
while TLP, DLLP, TS1 and TS2 use Packet Match Resources. The Global State has two Timers
and two Counters.
Figure 5.23: Global State
For the Global State there are only 2 Basic Resources for each Channel. Some
optimization is done internally to accommodate additional resources. You can keep
adding resources to the Global state so long as the Config is valid button stays green. If
you add a new event which is not valid a window appears with a message prompting
Invalid Recording Rules Configuration and the Config is valid button will turn red (see
Figure 5.24 on page 69 ).